LED Flood Lights

Characteristics：

• Compared with traditional HPS or Mercury flood lighting, our LED High Power Flood Lights save 65% - 70% electricity cost.
• Lifespan is 3 - 5 times more than lifespan of HPS, metal halide and halogen lamps.
• Reduced operating costs and easy maintenance
• No replacement of lamp or ballast
• No ill glare, abrupt or frequent flashes.
• Smaller UPS and/or generators for emergency back-up (save space and money)
• Eco-friendly - no UV, IR, lead, mercury or air pollution.

Specifications:

LED FLOOD LIGHT SPECIFICATION LIST

Characteristics：

• Compared with traditional HPS lamp or Mercury Flood lighting, our LED High Power Flood Lights save more than 87% electricity cost.
• Patented, unique design with multiple aluminum heat dissipation
• High brightness, applies luminous efficiency >100 lm/w, its twice as much brightness as compared others in the same industry
• Its just 5.7% lumen depreciate after continously working for 6000 hours
• Reduced operating costs and easy maintenance
• No replacement of lamp or ballast
• No ill glare, abrupt or frequent flashes.
• Smaller UPS and/or generators for emergency back-up (save space and money)
• Eco-friendly - no UV, IR, lead, mercury or air pollution.

Main Technology Index：

Characteristics:

• Adopt high power Epsitar LED as light source
• Long service lifetime to 50000 hours
• Good-looking outlay
• Anti-aging material
• Lamp body rotation for 50deg;,flood projecting and spot projecting performable
• Is totally sealed
• Safe, Energy saving
• Easy to install and operate

Specification:

a) Input Voltage: 100~240VAC 50/60Hz

b) Replacement: 80W - 120W for Traditional Lamp Lights

c) LED Qty: 36*1W, 56W LED Power

d) Light Source: Epistar High Power LED

e) Beam Angle: 50 Degree

f) Projecting range:10m-40m

g) IP Rate:IP65

h) Color Temperature: Pure White >6000

i) Size: 280*180*70mm

Application:

Floodlighting and wallwashing for bridges, logistic warehousing, factories, manufacturing plants, trains stations, bus stations, airports, bars, clubs, hotels, stages, parks, plazas, commercial buildings facade, mosques, museums, and art galleries, historical buildings, etc

Notice:

1. Don’t use in the place corrosive, flammable or explosive

2. Not install in the place near heat.

3. When the lamp lights, don't envisage it.

4. It must be installed by professionals.

LED Plant Grow Lights only delivers the spectrum of light used by plants for efficient and healthy growth. By leaving out the wavelengths plants won't use, they provide better energy efficiency than conventional grow lights. Over 80% of the light emitted from an HID Light is wasted in the form of non-absorbable light waves as well as heat energy.

The red and blue lights of LED will play an important role. A combination of both red and blue light would be required for the full growth of a fruit or flower bearing plant. It helps the plant in the process of photosynthesis. You can expect quick flowering, seeding, and fruits by our LED Plant Grow Light.

Red LED Light - Plants will first absorb red light for the purpose of photosynthesis. Red light helps to flowing and bears fruit, it also help to prolong the flowering period.

Blue LED Light - LED Plant Grow Light with blue color is useful for vegetable growth. After absorbing red light, the plant will absorb blue light and this light is responsible for the health of a plant. Moreover, the blue and green lights have more sunlight energy that is required for the healthy growth of vegetables.

• Use high power Cree LED, provide different wavelength of light which can be fully absorbed by the plants
• Enhancing plant growth, budding, flowering, plants photosynthesis
• More than 80% energy saving
• Easier installation and used
• No ballasts or reflectors
• Lead free, without mercury and other harmful substances, no filaments
• No thermal radiation, No strobe light, No ultraviolet ray

LED Plant Grow Lights only delivers the spectrum of light used by plants for efficient and healthy growth. By leaving out the wavelengths plants won't use, they provide better energy efficiency than conventional grow lights. Over 80% of the light emitted from an HID Light is wasted in the form of non-absorbable light waves as well as heat energy.

The red and blue lights of LED will play an important role. A combination of both red and blue light would be required for the full growth of a fruit or flower bearing plant. It helps the plant in the process of photosynthesis. You can expect quick flowering, seeding, and fruits by our LED Plant Grow Light.

Red LED Light - Plants will first absorb red light for the purpose of photosynthesis. Red light helps to flowing and bears fruit, it also help to prolong the flowering period.

Blue LED Light - LED Plant Grow Light with blue color is useful for vegetable growth. After absorbing red light, the plant will absorb blue light and this light is responsible for the health of a plant. Moreover, the blue and green lights have more sunlight energy that is required for the healthy growth of vegetables.

• Use high power Cree LED, provide different wavelength of light which can be fully absorbed by the plants
• Enhancing plant growth, budding, flowering, plants photosynthesis
• More than 80% energy saving
• Easier installation and used
• No ballasts or reflectors
• Lead free, without mercury and other harmful substances, no filaments
• No thermal radiation, No strobe light, No ultraviolet ray

LED Plant Grow Lights only delivers the spectrum of light used by plants for efficient and healthy growth. By leaving out the wavelengths plants won't use, they provide better energy efficiency than conventional grow lights. Over 80% of the light emitted from an HID Light is wasted in the form of non-absorbable light waves as well as heat energy.

The red and blue lights of LED will play an important role. A combination of both red and blue light would be required for the full growth of a fruit or flower bearing plant. It helps the plant in the process of photosynthesis. You can expect quick flowering, seeding, and fruits by our LED Plant Grow Light.

Red LED Light - Plants will first absorb red light for the purpose of photosynthesis. Red light helps to flowing and bears fruit, it also help to prolong the flowering period.

Blue LED Light - LED Plant Grow Light with blue color is useful for vegetable growth. After absorbing red light, the plant will absorb blue light and this light is responsible for the health of a plant. Moreover, the blue and green lights have more sunlight energy that is required for the healthy growth of vegetables.

• Use high power Cree LED, provide different wavelength of light which can be fully absorbed by the plants
• Enhancing plant growth, budding, flowering, plants photosynthesis
• More than 80% energy saving
• Easier installation and used
• No ballasts or reflectors
• Lead free, without mercury and other harmful substances, no filaments
• No thermal radiation, No strobe light, No ultraviolet ray

LED Plant Grow Lights only delivers the spectrum of light used by plants for efficient and healthy growth. By leaving out the wavelengths plants won't use, they provide better energy efficiency than conventional grow lights. Over 80% of the light emitted from an HID Light is wasted in the form of non-absorbable light waves as well as heat energy.

The red and blue lights of LED will play an important role. A combination of both red and blue light would be required for the full growth of a fruit or flower bearing plant. It helps the plant in the process of photosynthesis. You can expect quick flowering, seeding, and fruits by our LED Plant Grow Light.

Red LED Light - Plants will first absorb red light for the purpose of photosynthesis. Red light helps to flowing and bears fruit, it also help to prolong the flowering period.

Blue LED Light - LED Plant Grow Light with blue color is useful for vegetable growth. After absorbing red light, the plant will absorb blue light and this light is responsible for the health of a plant. Moreover, the blue and green lights have more sunlight energy that is required for the healthy growth of vegetables.

• Use high power Cree LED, provide different wavelength of light which can be fully absorbed by the plants
• Enhancing plant growth, budding, flowering, plants photosynthesis
• More than 80% energy saving
• Easier installation and used
• No ballasts or reflectors
• Lead free, without mercury and other harmful substances, no filaments
• No thermal radiation, No strobe light, No ultraviolet ray

Characteristics：

• Compared with traditional HPS or Mercury flood lighting, our LED High Power Flood Lights save 65% - 70% electricity cost.
• Lifespan is 3 - 5 times more than lifespan of HPS, metal halide and halogen lamps.
• Reduced operating costs and easy maintenance
• No replacement of lamp or ballast
• No ill glare, abrupt or frequent flashes.
• Smaller UPS and/or generators for emergency back-up (save space and money)
• Eco-friendly - no UV, IR, lead, mercury or air pollution.

Specifications:

LED FLOOD LIGHT SPECIFICATION LIST 

Characteristics：

• Compared with traditional HPS or Mercury flood lighting, our LED High Power Flood Lights save 65% - 70% electricity cost.
• Lifespan is 3 - 5 times more than lifespan of HPS, metal halide and halogen lamps.
• Reduced operating costs and easy maintenance
• No replacement of lamp or ballast
• No ill glare, abrupt or frequent flashes.
• Smaller UPS and/or generators for emergency back-up (save space and money)
• Eco-friendly - no UV, IR, lead, mercury or air pollution.

Specifications:

LED FLOOD LIGHT SPECIFICATION LIST