Welcome to TQ Leds E-commerce

LED Flood Lights

LED Flood Lights

Set Descending Direction

1-10 of 19

Page:
  1. 1
  2. 2
  1. TQ-FL36W High Power LED Flood Lights

    Characteristics:

    • Adopt 3W high power LED as light source
    • Long service lifetime to 50000 hours
    • Good-looking outlay
    • Anti-aging material
    • Lamp body rotation for 90°,flood projecting and spot projecting performable
    • Is totally sealed
    • Safe, Energy saving
    • Easy to install and operate

     

    Specification:

    a) Input Voltage: 100~240VAC 50/60Hz

    b) LED Qty: 12*3W

    c) Luminous Flux: 2160lm

    d) Light Source: High Power LED

    e) Beam Angle:15,90 Degree

    f) Projecting range:10m-40m

    g) IP Rate: IP65

    h) Color Temperature: Pure White >6000

    h) Size: 280*210*180mm

    i) Net weight: 3.8Kg

    j) Replacement: 120W - 180W for Traditional Lamp Lights

    Learn More
  2. TQ-FL36x1W  56W High Power LED Flood Lights

    Characteristics:

    • Adopt high power Epsitar LED as light source
    • Long service lifetime to 50000 hours
    • Good-looking outlay
    • Anti-aging material
    • Lamp body rotation for 50deg;,flood projecting and spot projecting performable
    • Is totally sealed
    • Safe, Energy saving
    • Easy to install and operate

     

    Specification:

    a) Input Voltage: 100~240VAC 50/60Hz

    b) Replacement: 80W - 120W for Traditional Lamp Lights

    c) LED Qty: 36*1W, 56W LED Power

    d) Light Source: Epistar High Power LED

    e) Beam Angle: 50 Degree

    f) Projecting range:10m-40m

    g) IP Rate:IP65

    h) Color Temperature: Pure White >6000

    i) Size: 280*180*70mm

     

    Application:

    Floodlighting and wallwashing for bridges, logistic warehousing, factories, manufacturing plants, trains stations, bus stations, airports, bars, clubs, hotels, stages, parks, plazas, commercial buildings facade, mosques, museums, and art galleries, historical buildings, etc

     

    Notice:

    1. Don’t use in the place corrosive, flammable or explosive

    2. Not install in the place near heat.

    3. When the lamp lights, don't envisage it.

    4. It must be installed by professionals.

    Learn More
  3. 56F

    LED Plant Grow Lights only delivers the spectrum of light used by plants for efficient and healthy growth. By leaving out the wavelengths plants won't use, they provide better energy efficiency than conventional grow lights. Over 80% of the light emitted from an HID Light is wasted in the form of non-absorbable light waves as well as heat energy.

    The red and blue lights of LED will play an important role. A combination of both red and blue light would be required for the full growth of a fruit or flower bearing plant. It helps the plant in the process of photosynthesis. You can expect quick flowering, seeding, and fruits by our LED Plant Grow Light.


    Red LED Light
    - Plants will first absorb red light for the purpose of photosynthesis. Red light helps to flowing and bears fruit, it also help to prolong the flowering period.


    Blue LED Light
    - LED Plant Grow Light with blue color is useful for vegetable growth. After absorbing red light, the plant will absorb blue light and this light is responsible for the health of a plant. Moreover, the blue and green lights have more sunlight energy that is required for the healthy growth of vegetables.

    • Use high power Cree LED, provide different wavelength of light which can be fully absorbed by the plants
    • Enhancing plant growth, budding, flowering, plants photosynthesis
    • More than 80% energy saving
    • Easier installation and used
    • No ballasts or reflectors
    • Lead free, without mercury and other harmful substances, no filaments
    • No thermal radiation, No strobe light, No ultraviolet ray
    Learn More
  4. TQ-SG-140P LED Plant Grow Lights

    LED Plant Grow Lights only delivers the spectrum of light used by plants for efficient and healthy growth. By leaving out the wavelengths plants won't use, they provide better energy efficiency than conventional grow lights. Over 80% of the light emitted from an HID Light is wasted in the form of non-absorbable light waves as well as heat energy.

    The red and blue lights of LED will play an important role. A combination of both red and blue light would be required for the full growth of a fruit or flower bearing plant. It helps the plant in the process of photosynthesis. You can expect quick flowering, seeding, and fruits by our LED Plant Grow Light.


    Red LED Light
    - Plants will first absorb red light for the purpose of photosynthesis. Red light helps to flowing and bears fruit, it also help to prolong the flowering period.


    Blue LED Light
    - LED Plant Grow Light with blue color is useful for vegetable growth. After absorbing red light, the plant will absorb blue light and this light is responsible for the health of a plant. Moreover, the blue and green lights have more sunlight energy that is required for the healthy growth of vegetables.

    • Use high power Cree LED, provide different wavelength of light which can be fully absorbed by the plants
    • Enhancing plant growth, budding, flowering, plants photosynthesis
    • More than 80% energy saving
    • Easier installation and used
    • No ballasts or reflectors
    • Lead free, without mercury and other harmful substances, no filaments
    • No thermal radiation, No strobe light, No ultraviolet ray
    Learn More
  5. TQ-SG-112P LED Plant Grow Lights

    LED Plant Grow Lights only delivers the spectrum of light used by plants for efficient and healthy growth. By leaving out the wavelengths plants won't use, they provide better energy efficiency than conventional grow lights. Over 80% of the light emitted from an HID Light is wasted in the form of non-absorbable light waves as well as heat energy.

    The red and blue lights of LED will play an important role. A combination of both red and blue light would be required for the full growth of a fruit or flower bearing plant. It helps the plant in the process of photosynthesis. You can expect quick flowering, seeding, and fruits by our LED Plant Grow Light.


    Red LED Light
    - Plants will first absorb red light for the purpose of photosynthesis. Red light helps to flowing and bears fruit, it also help to prolong the flowering period.


    Blue LED Light
    - LED Plant Grow Light with blue color is useful for vegetable growth. After absorbing red light, the plant will absorb blue light and this light is responsible for the health of a plant. Moreover, the blue and green lights have more sunlight energy that is required for the healthy growth of vegetables.

    • Use high power Cree LED, provide different wavelength of light which can be fully absorbed by the plants
    • Enhancing plant growth, budding, flowering, plants photosynthesis
    • More than 80% energy saving
    • Easier installation and used
    • No ballasts or reflectors
    • Lead free, without mercury and other harmful substances, no filaments
    • No thermal radiation, No strobe light, No ultraviolet ray
    Learn More
  6. 56F

    LED Plant Grow Lights only delivers the spectrum of light used by plants for efficient and healthy growth. By leaving out the wavelengths plants won't use, they provide better energy efficiency than conventional grow lights. Over 80% of the light emitted from an HID Light is wasted in the form of non-absorbable light waves as well as heat energy.

    The red and blue lights of LED will play an important role. A combination of both red and blue light would be required for the full growth of a fruit or flower bearing plant. It helps the plant in the process of photosynthesis. You can expect quick flowering, seeding, and fruits by our LED Plant Grow Light.


    Red LED Light
    - Plants will first absorb red light for the purpose of photosynthesis. Red light helps to flowing and bears fruit, it also help to prolong the flowering period.


    Blue LED Light
    - LED Plant Grow Light with blue color is useful for vegetable growth. After absorbing red light, the plant will absorb blue light and this light is responsible for the health of a plant. Moreover, the blue and green lights have more sunlight energy that is required for the healthy growth of vegetables.

    • Use high power Cree LED, provide different wavelength of light which can be fully absorbed by the plants
    • Enhancing plant growth, budding, flowering, plants photosynthesis
    • More than 80% energy saving
    • Easier installation and used
    • No ballasts or reflectors
    • Lead free, without mercury and other harmful substances, no filaments
    • No thermal radiation, No strobe light, No ultraviolet ray
    Learn More
  7. TQ-JC160 LED High Power Flood Lights  162W/ 135W

    Characteristics:

    • Compared with traditional HPS or Mercury flood lighting, our LED High Power Flood Lights save 65% - 70% electricity cost.
    • Lifespan is 3 - 5 times more than lifespan of HPS, metal halide and halogen lamps.
    • Reduced operating costs and easy maintenance
    • No replacement of lamp or ballast
    • No ill glare, abrupt or frequent flashes.
    • Smaller UPS and/or generators for emergency back-up (save space and money)
    • Eco-friendly - no UV, IR, lead, mercury or air pollution.

     

    Specifications:

    LED FLOOD LIGHT SPECIFICATION LIST 

    Model No.

     

    TQ-JC160  LED Flood Lights 162W/ 135W                         (USA Technology)

    LED Light Source

    CREE (USA Technology)

    LED Quantity:

    132 pcs

    Replacement:

    550W – 850W Conventional Lighting

    Rated Power:

    162W/ 135W      

    Input Voltage:

    AC100 - 240V

    Frequency Range:

    50/ 60HZ

    Power Factor:

    > 0.9

    THD:

    < 15%

    Color:

    132 single/ 44R 44G 44B    

    Control Mode:

    CC/ DMX512

    Beam Angle:

    10°  25°  40°  60°

    Light Luminous Flux:

    10526lm/ 5380 lm

    Temperature of Working Condition:

    -25℃ ~ 50℃

    Humidity of Working Condition:

    10% - 90%

    Service Life:

    > 50000 hours

    Protection Grade:

    IP65

    Bolt Center of Light

    Φ12mm × 100mm

    N.W.:

    16.4 KG

    G.W:

    18.4 KG

    Light Size:

    572 × 530 × 114.5mm

    Packing Size:

    645 × 570 × 205mm

    Learn More
  8. TQ-JC90 LED High Power Flood Lights  88W/ 76W

    Characteristics:

    • Compared with traditional HPS or Mercury flood lighting, our LED High Power Flood Lights save 65% - 70% electricity cost.
    • Lifespan is 3 - 5 times more than lifespan of HPS, metal halide and halogen lamps.
    • Reduced operating costs and easy maintenance
    • No replacement of lamp or ballast
    • No ill glare, abrupt or frequent flashes.
    • Smaller UPS and/or generators for emergency back-up (save space and money)
    • Eco-friendly - no UV, IR, lead, mercury or air pollution.

     

    Specifications:

    LED FLOOD LIGHT SPECIFICATION LIST 

    Model No.

     

    TQ-JC90  LED Flood Lights  88W/ 76W                          (USA Technology)

    LED Light Source

    CREE (USA Technology)

    LED Quantity:

    72 pcs

    Replacement:

    300W – 450W Conventional Lighting

    Rated Power:

    88W/ 76W          

    Input Voltage:

    AC100 - 240V

    Frequency Range:

    50/ 60HZ

    Power Factor:

    > 0.9

    THD:

    < 15%

    Color:

    72 single/  24R 24G 24B    

    Control Mode:

    CC/ DMX512

    Beam Angle:

    10°  25°  40°  60°

    Light Luminous Flux:

    5835lm/ 2981 lm

    Temperature of Working Condition:

    -25℃ ~ 50℃

    Humidity of Working Condition:

    10% - 90%

    Service Life:

    > 50000 hours

    Protection Grade:

    IP65

    Bolt Center of Light

    Φ12mm × 100mm

    N.W.:

    10.2 KG

    G.W:

    10.9 KG

    Light Size:

    454 × 408 × 106mm

    Packing Size:

    540 × 450 × 195mm

    Learn More
  9. TQ-JC60 LED High Power Flood Lights 60W/ 52W

    Characteristics:

    • Compared with traditional HPS or Mercury flood lighting, our LED High Power Flood Lights save 65% - 70% electricity cost.
    • Lifespan is 3 - 5 times more than lifespan of HPS, metal halide and halogen lamps.
    • Reduced operating costs and easy maintenance
    • No replacement of lamp or ballast
    • No ill glare, abrupt or frequent flashes.
    • Smaller UPS and/or generators for emergency back-up (save space and money)
    • Eco-friendly - no UV, IR, lead, mercury or air pollution.

     

    Specifications:

    LED FLOOD LIGHT SPECIFICATION LIST 

    Model No.

     

    TQ-JC60  LED Flood Lights  60W/ 52W               (USA Technology)

    LED Light Source

    CREE (USA Technology)

    LED Quantity:

    48 pcs

    Replacement:

    200W – 320W Conventional Lighting

    Input Voltage:

    AC100 - 240V

    Frequency Range:

    50/ 60HZ

    Power Factor:

    > 0.9

    THD:

    < 15%

    Color:

    48 single/ 16R 16G 16B    

    Control Mode:

    CC/ DMX512

    Beam Angle:

    10°  25°  40°  60°

    Light Luminous Flux:

    3874lm/ 1980 lm

    Temperature of Working Condition:

    -25℃ ~ 50℃

    Humidity of Working Condition:

    10% - 90%

    Service Life:

    > 50000 hours

    Protection Grade:

    IP65

    Bolt Center of Light

    Φ12mm × 100mm

    N.W.:

    7.0KG

    G.W:

    7.7 KG

    Light Size:

    405 × 329 × 89.5mm

    Packing Size:

    480 × 360 × 170mm

    Learn More
  10. TQ-JC45 LED High Power Flood Lights 45W/ 40W

    Characteristics:

    • Compared with traditional HPS or Mercury flood lighting, our LED High Power Flood Lights save 65% - 70% electricity cost.
    • Lifespan is 3 - 5 times more than lifespan of HPS, metal halide and halogen lamps.
    • Reduced operating costs and easy maintenance
    • No replacement of lamp or ballast
    • No ill glare, abrupt or frequent flashes.
    • Smaller UPS and/or generators for emergency back-up (save space and money)
    • Eco-friendly - no UV, IR, lead, mercury or air pollution.

     

    Specifications:

    LED FLOOD LIGHT SPECIFICATION LIST

    Model No.

     

    TQ-JC45  LED Flood Lights  36 Single Colors 45/40W

    LED Light Source

    CREE (USA Technology)

    LED Quantity:

    36 pcs

    Replacement:

    150W – 200W Conventional Lighting

    Rated Power:

    45W/ 40W          

    Input Voltage:

    AC100-240V

    Frequency Range:

    50/60HZ

    Power Factor:

    >0.9

    THD:

    <15%

    Color:

    36 single/12R12G12B    

    Control Mode:

    CC/ DMX512

    Beam Angle:

    10°  25°  40°  60°

    Light Luminous Flux:

    3085lm/ 1577 lm

    Temperature of Working Condition:

    -25℃ ~ 50℃

    Humidity of Working Condition:

    10% - 90%

    Service Life:

    > 50000 hours

    Protection Grade:

    IP65

    Bolt Center of Light

    Φ12mm × 100mm

    N.W.:

    6.7 KG

    G.W:

    7.1 KG

    Light Size:

    405 × 329 × 89.5 mm

    Packing Size:

    480 × 360 × 170 mm

    Learn More

Set Descending Direction

1-10 of 19

Page:
  1. 1
  2. 2